2022 Good Quality Steel Tooth Bit - Deep well drilling bits IADC127 12 1/4 ” (311mm) – FAR EASTERN
2022 Good Quality Steel Tooth Bit - Deep well drilling bits IADC127 12 1/4 ” (311mm) – FAR EASTERN Detail:
Product Description
Wholesale API tricone rock bit in stock based on the lowest quotation and excellent quality for deep well.
Bit Description:
IADC: 127 – Steel tooth journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability.
Compressive Strength:
0 – 35 MPA
0 – 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
This superior method provides a stronger, more impact-resistant tooth than milling because the metal particle structure during forging is protected, resulting in stronger teeth. The details of Steel tooth Bit.
Far Eastern Drilling heat treatment process selectively carburizes the bearing wear surface to ensure the toughness of the structure. This provides long-lasting and reliable bearing performance.
Critical tooth hard-facing process is continually monitored and updated to ensure the highest quality hard facing deposit.
Steel tooth drills are suitable for extremely soft formations with low compressive strength and high drillability such as clay, mudstone, chalk, etc. They are also suitable for medium strata with high compressive strength, such as soft shale, anhydrite, medium soft limestone, medium soft sandstone. Medium stratum with a hard interlayer.
Product Specification
Basical Specification |
|
Size of Rock Bit |
12 1/4″ |
311.1mm |
|
Bit Type |
Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
Thread Connection |
6 5/8 API REG PIN |
IADC Code |
IADC 127 |
Bearing Type |
Journal Sealed Roller Bearing |
Bearing Seal |
Rubber Seal |
Heel Protection |
Available |
Shirttail Protection |
Available |
Circulation Type |
Mud Circulation |
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
Nozzles |
3 |
Operating Parameters |
|
WOB (Weight On Bit) |
28,971-59,419 lbs |
93-264KN |
|
RPM(r/min) |
60~180 |
Formation |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc. |
Dense teeth on cones of tricone bits means smaller teeth and harder rocks drilling capacity, shorter and smaller teeth makes milled teeth tricone drill bit can even drill soft or medium hardness rocks and the ROP is higher than TCI tricone bits. Surface of cones are enhanced by tungsten carbide hard-facing.
Please contact us to get more information, Far Eastern attends exhibitions in many countries worldwide, hopefully to talk with you face to face in near future.
Product detail pictures:
Related Product Guide:
We now have a specialist, efficiency workforce to deliver excellent service for our purchaser. We always follow the tenet of customer-oriented, details-focused for 2022 Good Quality Steel Tooth Bit - Deep well drilling bits IADC127 12 1/4 ” (311mm) – FAR EASTERN , The product will supply to all over the world, such as: San Diego, Oman, Hongkong, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good products quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
By Frank from Ukraine - 2018.05.13 17:00
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Heather from Jeddah - 2017.04.18 16:45