2022 High quality Milled Tooth Drill Bits - Milled Tooth Bits supplier IADC126 4.5 inches (114mm) – FAR EASTERN


Product Detail

Related Video

Catalog

Feedback (2)

To create much more price for clients is our company philosophy; purchaser growing is our working chase for tci tricone bit supplier, button bit factory, pdc 6" for oilwell, We have now four leading solutions. Our products are effective sold not only during the Chinese market, but also welcomed during the international industry.
2022 High quality Milled Tooth Drill Bits - Milled Tooth Bits supplier IADC126 4.5 inches (114mm) – FAR EASTERN Detail:

IADC417 12.25mm tricone bit

Product Description

IADC126 drilling rig bits

Wholesale API milled tooth sealed tricone roller cones bits in the stock based on the lowest price and excellent quality from China factory
Bit Description:
IADC: 126 – Steel tooth journal sealed bearing bit for soft formations with low compressive strength and high drillability.
Compressive Strength:
0 – 35 MPA
0 – 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.

According to cutting material,tirocne bit can be divided into TCI bit and Steel Tooth Bit .
Steel tooth tricone bits have another name milled tooth tricone bit since the teeth are produced by milling machine, the cone surface is hard-faced by tungsten carbide.
Steel teeth tricone bit is used for drilling soft formations, the advantage is higher ROP(Rate of Penetration) than TCI tricone bit, it has faster drilling down speed than Tungsten Carbide Insert tricone bit in drilling mudstone or other sticky rocks.
TCI tricone bit is suitable for drilling hard rocks, but bit-balling always happens in drilling soft and sticky formations which prevents drill bit going down.
The steel tooth tricone bits has longer teeth than TCI tricone bits so that it can drill soft formations at high ROP.
In oil drilling projects, the ROP could reach 30 meters per hour in shallow section drilling.
When you choose a FAR EASTERN drill bit, you get the right bit for the right application, so you can stay in the hole longer with fewer trips, at a lower cost-per-foot. Because we’ve been engineering this technology successfully for more than 15 years, we are confident in our legacy and that no other drill bit manufacturer can match our expertise.
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price. Far eastern drilling quality and technology will help you to achieve more!

Tricone bits
IADC417 12.25mm tricone bit

Product Specification

4 1/2″ mill tooth tricone drill bit is widely used in water well drilling, oil well drilling, geothermal well drilling, it can be used for drilling cement plug in very deep well.
The mill tooth tricone drill bit has longer teeth which could get much faster drilling down speed than TCI drill bits.;

Basical Specification
Size of Rock Bit 4 1/2″
114 mm
Bit Type Steel Tooth Tricone Bit/ Milled tooth Tricone Bit
Thread Connection 2 3/8 API REG PIN
IADC Code IADC 126
Bearing Type Journal Sealed Roller Bearing
Bearing Seal Rubber Seal
Heel Protection Unvailable
Shirttail Protection Available
Circulation Type Mud Circulation
Drilling Condition Rotary drilling,high temp drilling,deep drilling,motor drilling
Nozzles Central Jet Hole
Operating Parameters
WOB (Weight On Bit) 7,685-21,773 lbs
35-97KN
RPM(r/min) 60~180
Formation Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.

table
10012
10015
10012(1)


Product detail pictures:

2022 High quality Milled Tooth Drill Bits - Milled Tooth Bits supplier IADC126 4.5 inches (114mm) – FAR EASTERN detail pictures

2022 High quality Milled Tooth Drill Bits - Milled Tooth Bits supplier IADC126 4.5 inches (114mm) – FAR EASTERN detail pictures

2022 High quality Milled Tooth Drill Bits - Milled Tooth Bits supplier IADC126 4.5 inches (114mm) – FAR EASTERN detail pictures


Related Product Guide:

Our advantages are lessen charges,dynamic income team,specialized QC,sturdy factories,premium quality services for 2022 High quality Milled Tooth Drill Bits - Milled Tooth Bits supplier IADC126 4.5 inches (114mm) – FAR EASTERN , The product will supply to all over the world, such as: Czech Republic, Romania, Peru, Meanwhile, we're building up and consummating triangle market & strategic cooperation in order to achieve a multi-win trade supply chain to expand our market vertically and horizontally for a brighter prospects. development. Our philosophy is to create cost-effective products, promote perfect services, cooperate for long-term and mutual benefits, firm a comprehensive mode of excellent suppliers system and marketing agents, brand strategic cooperation sales system.
pdf
  • Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By Marcy Real from Nigeria - 2018.11.11 19:52
    The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Christian from Japan - 2017.10.25 15:53