2022 Latest Design Rotary Single Cone Bit - TCI tricone bit IADC537 7 7/8 inches (200 mm) – FAR EASTERN
2022 Latest Design Rotary Single Cone Bit - TCI tricone bit IADC537 7 7/8 inches (200 mm) – FAR EASTERN Detail:
Product Description
Wholesale API rotary tricone drilling bits in the stock from China factory is for deep oil well.
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3″ to 26″) and all most of IADC codes.
7 7/8″ Tricone Bits is a regular diameter for HDD pilot hole, this model has 3 lateral jet nozzles, the hydraulic performance is better than central jet hole in clearing rock chips especially in drilling sticky rocks.
Density and height of quality tungsten carbide inserts are optimized designed to reach the best ROP ( Rate of Penetration ), the bearing is sealed by Elastomer O-ring, and arms are armored by TC inserts.
Product Specification
Basical Specification |
|
Size of Rock Bit |
7 7/8 inches |
200mm |
|
Bit Type |
TCI Tricone Bit |
Thread Connection |
4 1/2 API REG PIN |
IADC Code |
IADC 537G |
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
Bearing Seal |
Elastomer or Rubber/ Metal |
Heel Protection |
Available |
Shirttail Protection |
Available |
Circulation Type |
Mud Circulation |
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
Nozzles |
Three Nozzles |
Operating Parameters |
|
WOB (Weight On Bit) |
20,223-44,940 lbs |
90-200KN |
|
RPM(r/min) |
50~220 |
Formation |
Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price..
Product detail pictures:
Related Product Guide:
We normally follow the basic principle Quality Initial, Prestige Supreme. We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for 2022 Latest Design Rotary Single Cone Bit - TCI tricone bit IADC537 7 7/8 inches (200 mm) – FAR EASTERN , The product will supply to all over the world, such as: Ecuador, Niger, Seattle, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards reasonable prices, efficient production time and good after-sales service as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
By April from Australia - 2017.09.29 11:19
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Sabrina from Kuwait - 2018.12.14 15:26