API factory of cement and bridge plug oil well drilling bit

Logo:	Far Eastern
Bit Standard:	API & ISO&SGS
Iadc No:	IADC127G
Tooth and Bearing:	Steel tooth journal sealed bearing
Circulation Type:	Mud Circulation
Heel protection:	Available
Shirttail protection	Available
Compressive strength	0-35 MPA
Ground Formation:	Very soft formation, such as poorly compacted clays and sandstones,marl limestones,salts,gypsum and hard coals

Send email to us

Product Detail

Catalog

Product Description

The tricone rock bit for cement and bridge plug is always steel tooth tricone bits, the bearing quality is requested to be very long working life, and the tooth arehard-faced by premium tungsten carbide powder.
Far Eastern drilling have 15 years to produce the drill bits. We have exported more than 30 countries services experience to supply the drill bits and advanced drilling soulutions for many different application such as field well drilling,natural gas well drilling,geological exploration well drilling,driectional boring,water well drilling ,We can OEM drill bits as per different rock formation. We get API & ISO certificate of tricone drill bits and PDC drill bit. We can give our engineer's solution when you can supply specific conditions, such as hardness of rocks,types of drilling rig,rotary speed,weight on bit and torque.

Product Specification

Basical Specification
Size of Rock Bit	4 1/2 inches
Size of Rock Bit	114.3 mm
Bit Type	Steel Teeth Tricone Bit
Thread Connection	2 3/8 API REG PIN
IADC Code	IADC127G
Bearing Type	Journal Sealed Bearing with Gauge Protection
Bearing Seal	Elastomer sealed or Rubber sealed
Heel Protection	Available
Shirttail Protection	Available
Circulation Type	Mud Circulation
Drilling Condition	Rotary drilling,high temp drilling,deep drilling,motor drilling
Total Teeth Count	62
Gage Row Teeth Count	36
Number of Gage Rows	3
Number of Inner Rows	4
Jounal Angle	36°
Offset	5
Operating Parameters
WOB (Weight On Bit)	8,988-25,616 lbs
WOB (Weight On Bit)	40-114KN
RPM(r/min)	300~60
Recommended upper torque	4.1KN.M-4.7KN.M
Formation	Soft formation of low crushing resistance and high drillability.

Tricone bits, which some may also call roller cone bits or tri-cone bits, have three cones. Each cone can be rotated individually when the drill string rotates the body of the bit. The cones have roller bearings fitted at the time of assembly. The rolling cutting bits can be used to drill any formations if the proper cutter, bearing, and nozzle are selected.
Characteristics
1. The strength and wear resistance of inserts are improve by using carbide inserts with high strength and high wear resistance.
2. Surface of the high precision bearing heat treated by using advanced heat treatment process to improve the load capacity and service life of the bearing.
3. The service life of the bearing is further extended by adopting harder and more wear resistant material for thrust bearing.
4. This series oil well rock bit use sealed roller bearing structure. With rollers arranged in grooves recessed in the cone body, the size of the bearing journal is increased.
5. Thrust bearing surfaces are hard faced and treated with friction reducing technology.
6. Rotary drill bits use journal bearing. Hard faced head bearing surface. Cone bearing inlaid with friction reducing alloy and then silver-plated. The load capacity and seizure resistance of the bearing is greatly improve.