Good quality Metal Sealed Tricone Bit - API factory of rock roller cones bits IADC437 8.5″ for drilling – FAR EASTERN
Good quality Metal Sealed Tricone Bit - API factory of rock roller cones bits IADC437 8.5″ for drilling – FAR EASTERN Detail:
Product Description
Metal Face sealed TCI Drill Bit IADC437 8 1/2″ (215mm or 216mm) is for soft formation well drilling.
Bit Description:
IADC: 437 – TCI journal sealed bearing bit with gauge protection for soft formations with low compressive strength and high drillability.
Compressive Strength:
65 – 85 MPA
9,000 – 12,000 PSI
Ground Description:
Long intervals of very soft poorly compacted shales, dolomites, sandstones, clays, salts and limestones.
Far Eastern Drilling can offer tricone drill bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.
1>8 1/2″(215mm or 216mm) is a regular size in deep well drilling like oil and gas well drilling, and it is also a regular size in horizontal directional pilot hole drilling.
2>We have two types of tricone bit according to grades of bearing , one is Elastomer sealed bearing with normal quality and price, another is Metal-face sealed bearing with higher performance and price.
3>For very deep well drilling, we recommend Metal-face sealed bearing tricone bits in drilling depth exceeds 1000 meters, for hard rock and long distance trenchless pilot hole drilling that length exceeds 300 meters we also recommend metal-face sealed bearing tricone bits.
4>For water well drilling, shallow well drilling or shorter distance trenchless pilot hole drilling projects, elastomer(rubber) sealed bearing tricone bits has better cost performance.
Product Specification
Basical Specification |
|
Size of Rock Bit |
8.5 inches |
215.90 mm |
|
Bit Type |
TCI Tricone Bit |
Thread Connection |
4 1/2 API REG PIN |
IADC Code |
IADC 437G |
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
Bearing Seal |
Elastomer/Rubber |
Heel Protection |
Available |
Shirttail Protection |
Available |
Circulation Type |
Mud Circulation |
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
Total Teeth Count |
80 |
Gage Row Teeth Count |
33 |
Number of Gage Rows |
3 |
Number of Inner Rows |
7 |
Jounal Angle |
33° |
Offset |
8 |
Operating Parameters |
|
WOB (Weight On Bit) |
17,077-49,883 lbs |
76-222KN |
|
RPM(r/min) |
300~60 |
Recommended upper torque |
16.3-21.7KN.M |
Formation |
Soft formation of low crushing resistance and high drillability. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for water well, oil field, gas well,mining,construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the high quality products at the lowest possible price.
Product detail pictures:
Related Product Guide:
Adhering into the principle of quality, provider, performance and growth, we now have gained trusts and praises from domestic and intercontinental consumer for Good quality Metal Sealed Tricone Bit - API factory of rock roller cones bits IADC437 8.5″ for drilling – FAR EASTERN , The product will supply to all over the world, such as: Malaysia, Uzbekistan, Bulgaria, Ensuring high product quality by choosing nice suppliers, now we have also implemented complete quality control processes throughout our sourcing procedures. Meanwhile, our access to a large range of factories, coupled with our excellent management, also ensures that we can quickly fill your requirements at the lower prices, regardless the order size.
By Barbara from Nigeria - 2018.10.01 14:14
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Clementine from Congo - 2017.07.07 13:00