Good quality Metal Sealed Tricone Bit - API factory of tricone roller bit IADC617 12 1/4 inches (311.1mm) – FAR EASTERN

Product Detail

Catalog

Feedback (2)

With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the value for our customers for tri cone bits IADC437, carbide drill bit IADC537, DUCTILE IRON GATE VALVE, Customers first! Whatever you require, we should do our ut to help you. We warmly welcome customers from all over the world to cooperate with us for mutual development.

Good quality Metal Sealed Tricone Bit - API factory of tricone roller bit IADC617 12 1/4 inches (311.1mm) – FAR EASTERN Detail:

IADC417 12.25mm tricone bit

Product Description

12 1-4 IADC617 (2)-1

Wholesale API rotary roller tricone drill bit with conical inserts in the stock from China factory.
Bit Description:
IADC: 617 – TCI journal sealed bearing bit with gauge protection for medium hard formations with high compressive strength..
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer tricone rock bits in avariety of sizes (from 3 3/8″ to 26″) and all most of IADC codes.

Far eastern drilling is one of the leading suppliers of drilling rock bits for oil, gas, water well drilling, construction, foundation, geological exploration located in China.
Far Eastern has confidence to supply world-wide market with sharp quality tricone drill rock bits, the tricone bits, PDC bits, reamers, foundation roller cones has been working in more than 35 countries in the past 10 years. Product quality, optimized solution and warm service have been our superiorities.
Quality of products is the life-line of Far Eastern and that’s the reason we perfect the quality control system continuously. All of the production processes are ruled by API Spec 7 and ISO9001.
Better solution is our working feature, we will provide the suitable solution according to drilling fields(vertical well drilling or horizontal well drilling, oil well drilling or No-Dig drilling or foundation piling), hardness of rocks, types of drill rigs, etc.

10008(1)
IADC417 12.25mm tricone bit

Product Specification

Basical Specification
Size of Rock Bit	12 1/4″
Size of Rock Bit	311.1mm
Bit Type	TCI Tricone Bit
Thread Connection	6 5/8 API REG PIN
IADC Code	IADC 617G
Bearing Type	Journal Sealed Bearing with Gauge Protection
Bearing Seal	Elastomer or Rubber/ Metal
Heel Protection	Available
Shirttail Protection	Available
Circulation Type	Mud Circulation
Drilling Condition	Rotary drilling,high temp drilling,deep drilling,motor drilling
Nozzles	3
Operating Parameters
WOB (Weight On Bit)	31,458-76,847 lbs
WOB (Weight On Bit)	140-342KN
RPM(r/min)	50~90
Formation	Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc.

table

Far Eastern are factory specializes in drill bits,such as tricone bits, PDCs bits, HDD hole opener,Foundation roller cutters for many different applications.The application including oil field,natural gas,geological exploration,directional boring,mining,water well drilling,HDD, Construction and foundation…
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our mission is lower the cost of drilling-per-meter. .Our purpose is to sell the high quality with the lowest price. Far Easter Drilling’s quality will help you to achieve more.

10013(1)
10015
10010(5)

Product detail pictures:

Related Product Guide:

We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for Good quality Metal Sealed Tricone Bit - API factory of tricone roller bit IADC617 12 1/4 inches (311.1mm) – FAR EASTERN , The product will supply to all over the world, such as: Azerbaijan, Washington, Spain, Our staffs are rich in experience and trained strictly, with professional knowledge, with energy and always respect their customers as the No. 1, and promise to do their to provide the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we will develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.