Hot New Products Steel Tooth Tricone Bit - API drill bts factory IADC126 4 3/4 inches (120mm) – FAR EASTERN


Product Detail

Related Video

Catalog

Feedback (2)

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for pdc drilling bits, tricone bits factory 444.5mm, CORROSION RESISTANT VALVE, Make sure you come to feel absolutely cost-free to speak to us for organization. nd we think we're going to share the ideal trading practical experience with all our retailers.
Hot New Products Steel Tooth Tricone Bit - API drill bts factory IADC126 4 3/4 inches (120mm) – FAR EASTERN Detail:

IADC417 12.25mm tricone bit

Product Description

drill bits IADC126

Wholesale API milled tooth sealed tricone roller cones bits in the stock based on the lowest price and excellent quality from China factory
Bit Description:
IADC: 126 – Steel tooth journal sealed bearing bit for soft formations with low compressive strength and high drillability.
Compressive Strength:
0 – 35 MPA
0 – 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.

According to cutting material,tirocne bit can be divided into TCI bit and Steel Tooth Bit .
Steel tooth tricone bits have another name milled tooth tricone bit since the teeth are produced by milling machine, the cone surface is hard-faced by tungsten carbide.
Steel teeth tricone bit is used for drilling soft formations, the advantage is higher ROP(Rate of Penetration) than TCI tricone bit, it has faster drilling down speed than Tungsten Carbide Insert tricone bit in drilling mudstone or other sticky rocks.
TCI tricone bit is suitable for drilling hard rocks, but bit-balling always happens in drilling soft and sticky formations which prevents drill bit going down.
The steel tooth tricone bits has longer teeth than TCI tricone bits so that it can drill soft formations at high ROP.
In oil drilling projects, the ROP could reach 30 meters per hour in shallow section drilling.
When you choose a FAR EASTERN drill bit, you get the right bit for the right application, so you can stay in the hole longer with fewer trips, at a lower cost-per-foot. Because we’ve been engineering this technology successfully for more than 15 years, we are confident in our legacy and that no other drill bit manufacturer can match our expertise.
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price. Far eastern drilling quality and technology will help you to achieve more!

tricone drilling iadc126
IADC417 12.25mm tricone bit

Product Specification

4 3/4″ is always used in exploration, water well drilling and cement plug drilling, it has a central flush hole for mud fluid circulation, the bearing is sealed and thread connection is produced in rules of API 2 7/8 reg pin.
The teeth are hard-faced by tungsten carbide, teeth life is very long in drilling mudstone and soft rocks.
Far Eastern has customers in more than 35 countries, welcome your inquiry.

Basical Specification

Rock bit Dia

4 3/4″

120.6 mm

Type of Bit

Steel Tooth Tricone Bit/ Milled tooth Tricone Bit

Thread

2 3/8 API REG PIN

IADC Code

IADC 126

Type of Bearing

Journal Sealed Roller Bearing

Bearing Seal

Rubber Sealed

Heel Protection

Unvailable

Shirttail Protection

Available

Circulation Type

Mud Circulation

Drilling Condition

Rotary drilling,high temp drilling,deep drilling,motor drilling

Nozzles

Central Jet Hole

Operating Parameters

Weight On Bit

9,437-23,144 lbs

42-103KN

Rotary Speed(r/min)

60~180

Formation

Soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone ,etc.

table
10012
10015
10011


Product detail pictures:

Hot New Products Steel Tooth Tricone Bit - API drill bts factory IADC126 4 3/4 inches (120mm) – FAR EASTERN detail pictures

Hot New Products Steel Tooth Tricone Bit - API drill bts factory IADC126 4 3/4 inches (120mm) – FAR EASTERN detail pictures

Hot New Products Steel Tooth Tricone Bit - API drill bts factory IADC126 4 3/4 inches (120mm) – FAR EASTERN detail pictures


Related Product Guide:

We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for Hot New Products Steel Tooth Tricone Bit - API drill bts factory IADC126 4 3/4 inches (120mm) – FAR EASTERN , The product will supply to all over the world, such as: Norwegian, South Korea, Philippines, Since its foundation , the company keeps living up to the belief of honest selling , high quality , people-orientation and benefits to customers. We are doing everything to offer our customers with whole heartedly services and products . We promise that we'll be responsible all the way to the end once our services begin.
pdf
  • This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Michelle from Auckland - 2017.06.22 12:49
    On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Myra from Cambodia - 2018.12.28 15:18