Hot Selling for Single Cone Cutter - TCI rock bit IADC537 7 1/2 ” (190 mm) – FAR EASTERN
Hot Selling for Single Cone Cutter - TCI rock bit IADC537 7 1/2 ” (190 mm) – FAR EASTERN Detail:
Product Description
Wholesale API TCI rock roller bits in the stock from China factory is for drilling rig machinery.
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3″ to 26″) and all most of IADC codes.
TCI is short for Tungsten Carbide Insert, tungsten carbide is regular hard material in rock drilling field, another material is diamond.
Inserts means Tungsten Carbide teeth that’s fitting on cones of rotary drilling roller cone bits.
Product Specification
Basical Specification |
|
Size of Rock Bit |
7 1/2 inches |
190mm |
|
Bit Type |
TCI Tricone Bit |
Thread Connection |
4 1/2 API REG PIN |
IADC Code |
IADC 537G |
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
Bearing Seal |
Elastomer or Rubber/ Metal |
Heel Protection |
Available |
Shirttail Protection |
Available |
Circulation Type |
Mud Circulation |
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
Nozzles |
Three Nozzles |
Operating Parameters |
|
WOB (Weight On Bit) |
15,054-42,693 lbs |
67-190KN |
|
RPM(r/min) |
50~220 |
Formation |
Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price.
Product detail pictures:
Related Product Guide:
With our excellent administration, potent technical capability and strict high quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your trusted partners and earning your fulfillment for Hot Selling for Single Cone Cutter - TCI rock bit IADC537 7 1/2 ” (190 mm) – FAR EASTERN , The product will supply to all over the world, such as: Nepal, French, Sierra Leone, With the support of our highly experienced professionals, we manufacture and supply high quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By Victor Yanushkevich from Comoros - 2018.02.21 12:14
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Steven from Oman - 2018.06.03 10:17