Manufacturer for Mill Tooth Tricone Bit - Mill tooth bits for well drilling IADC215 17.5 inches (444.5mm) – FAR EASTERN
Manufacturer for Mill Tooth Tricone Bit - Mill tooth bits for well drilling IADC215 17.5 inches (444.5mm) – FAR EASTERN Detail:
Product Description
Wholesale API tricone rock roller drill bit in stock based on the lowest quotation and excellent quality from China factory
Bit Description:
IADC: 215 – Steel tooth sealed roller bearing bit with gauge protection for medium to medium hard formations with high compressive strength.
Compressive Strength:
0 – 35 MPA
0 – 5,000 PSI
Ground Description:
Very soft, unstratified, poorly compacted rocks such as poorly compacted clays and sandstones, marl limestones, salts, gypsum, and hard coals.
We can offer mill tooth and TCI tricone drill bits in a variety of sizes (from 3 ” to 26”) and most of IADC Codes.
According to cutting material,three cones bit can be divided into TCI bit and Milled Tooth Bit
Milled tooth tricone bit IADC215 is for very soft formation. Choose the proper rocks drilling bits is very important before starting project.
Steel tooth tricone bits have another name milled tooth tricone bit since the teeth are produced by milling machine, the cone surface is hard-faced by tungsten carbide.
The steel tooth tricone bits has longer teeth than TCI tricone bits so that it can drill soft formations at high ROP.
In oil drilling projects, the ROP could reach 30 meters per hour in shallow section drilling.
When you choose a FAR EASTERN drill bit, you get the right bit for the right application, so you can stay in the hole longer with fewer trips, at a lower cost-per-foot. Because we’ve been engineering this technology successfully for more than 15 years, we are confident in our legacy and that no other drill bit manufacturer can match our expertise.
Product Specification
Basical Specification | |
Size of Rock Bit | 17 1/2 “ |
444.5mm | |
Bit Type | Steel Tooth Tricone Bit/ Milled tooth Tricone Bit |
Thread Connection | 7 5/8 API REG PIN |
IADC Code | IADC 125G |
Bearing Type | Journal Sealed Roller Bearing |
Bearing Seal | Rubber Seal |
Heel Protection | Anvailable |
Shirttail Protection | Available |
Circulation Type | Mud Circulation |
Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
Nozzles | Three Nozzles |
Operating Parameters | |
WOB (Weight On Bit) | 19,998-69,882 lbs |
89-311KN | |
RPM(r/min) | 60~300 |
Formation | Very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price. Far eastern drilling quality and technology will help you to achieve more!
faq
1. How to get an exact quotation?
Answer: Please send us detailed information as below:
-Tricone bits(Diameter, IADC code)
-PDC bits(Matrix or Steel body, blades quantity, cutter size, etc)
-Hole opener(Diameter, size of pilot hole, hardness of rocks, thread connection of your drill pipe, etc.)
-Roller cutters(Diameter of cones, model number, etc.)
-Core barrel(Diameter, quantity of cutters, connection, etc.)
A simple way is sending us photos .
Besides above, if possible please provide more information as below:
Drilling depth in vertical well drilling, Drilling length in HDD, hardness of rocks, Capacity of drill rigs, application(oil/gas well drilling, or water well drilling, or HDD, or foundation).
Incoterm: FOB or CIF or CFR, by plane or ship, port of destination/discharge.
The more information provided, the more exact quotation will be offered.
2. What is the quality control for your products?
Answer: All of our production are in lines of API rules and ISO9001:2015 strictly, from signing contract , to raw materials, to each production processes, to product finish, to after-sale service, each processes and sections are in accordant with standard.
3. About lead time,payment terms, delivery ?
Answer: We always have regular models available in stock, prompt delivery is one of our advantages. Mass production depends on quantity of order.
We accept all regular payment terms including L/C, T/T, etc.
We are near from Beijing airport and Tianjin(Xingang) seaport, transportation from our factory to Beijing or Tianjin only takes one day, fast and very economical inland charges.
4. What is the history of Far Eastern ?
Answer: The drilling bits business was started at year 2003 only for China domestic requirement, the name Far Eastern was started from year 2009, now Far Eastern has exported to more than 35 countries and areas.
5. Do you have Referenced Letters /Recommendation Letters from old customers?
Answer: Yes, we have many referenced letters/recommendation letters issued by old customers who would like to share our stories.
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Manufacturer for Mill Tooth Tricone Bit - Mill tooth bits for well drilling IADC215 17.5 inches (444.5mm) – FAR EASTERN , The product will supply to all over the world, such as: United States, Iran, Guyana, Our product quality is one of the major concerns and has been produced to meet the customer's standards. Customer services and relationship is another important area which we understand good communication and relationships with our customers is significant power to run it as a long term business.
By Erica from Manila - 2017.03.28 16:34
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Helen from Moldova - 2018.07.26 16:51