New Fashion Design for Tricone Rotary Drill Bits - Tungsten Carbide Insert Bit IADC537 8 1/2″(215.9mm) – FAR EASTERN
New Fashion Design for Tricone Rotary Drill Bits - Tungsten Carbide Insert Bit IADC537 8 1/2″(215.9mm) – FAR EASTERN Detail:
Product Description
Wholesale API Tungsten Carbide Insert rock roller drillling bits in the stock from China factory
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3″ to 26″) and all most of IADC codes.
According to cutting material,tirocne bit can be divided into TCI bit and Steel Tooth Bit .
TCI is short for Tungsten Carbide Insert, tungsten carbide is regular hard material in rock drilling field, another material is diamond.
Inserts means Tungsten Carbide teeth that’s fitting on cones of rotary drilling roller cone bits. .API TCI tricone bit. IADC537 8 1/2″ (215mm/216mm) have type of Rubber /Elastomer sealed bearing and Metal sealed bearing. We suggest that we had better choose metal face sealed bearing bits for deep rock wells with hard formations.For very deep well drilling, we recommend Metal-face sealed bearing tricone bits in drilling depth exceeds 1000 meters, For hard rock and long distance trenchless pilot hole drilling that length exceeds 300 meters we also recommend metal-face sealed bearing tricone bits.For water well drilling, shallow well drilling or shorter distance trenchless pilot hole drilling projects, elastomer(rubber) sealed bearing tricone bits has better cost performance.
Product Specification
Basical Specification |
|
Size of Rock Bit |
8.5 inches |
215mm/216mm |
|
Bit Type |
TCI Tricone Bit |
Thread Connection |
4 1/2 API REG PIN |
IADC Code |
IADC 537G |
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
Bearing Seal |
Elastomer or Rubber/ Metal |
Heel Protection |
Available |
Shirttail Protection |
Available |
Circulation Type |
Mud Circulation |
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
Nozzles |
Three Nozzles |
Operating Parameters |
|
WOB (Weight On Bit) |
21,795-48,535 lbs |
97-216KN |
|
RPM(r/min) |
50~220 |
Formation |
Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price.
Product detail pictures:
Related Product Guide:
With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of New Fashion Design for Tricone Rotary Drill Bits - Tungsten Carbide Insert Bit IADC537 8 1/2″(215.9mm) – FAR EASTERN , The product will supply to all over the world, such as: Ireland, Jamaica, Niger, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers' satisfaction and achieve win-win situation .
By Sahid Ruvalcaba from Hongkong - 2017.12.19 11:10
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Honorio from Colombia - 2017.08.18 11:04