API rock drill bit IADC537 5 1/2 ” (139.7 mm) for hard well
Product Description
Wholesale API TCI sealed bearing roller bits in the stock from China factory is for drilling rig machinery.
Optimal test method for drilling parameters:
1. Drill for 5 minutes with initially selected proper WOB and moderate RPM and record the ROP (as shown in the table below).
2. Moderately increase WOB and keep the same RPM and drill under this WOB for 5 minutes and again record the ROP (as shown in the table below).
3. Decrease WOB b the same extent and tepeat step 2.
4. Find the WOB in the tow groups of test than can yield highest ROP.
5. Properly change RPM under optimal WOB and record the ROP (as shown in the table below).
6. Select the RPM at the highest ROP.
7. Set the drilling parameter at the best combination
Product Specification
|
Basical Specification |
|
|
Size of Rock Bit |
5 1/2 inches |
|
140mm |
|
|
Bit Type |
TCI Tricone Bit |
|
Thread Connection |
3 1/2 API REG PIN |
|
IADC Code |
IADC 537G |
|
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
|
Bearing Seal |
Elastomer or Rubber/ Metal |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling, high temp drilling, deep drilling, motor drilling |
|
Nozzles |
Three Nozzles |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
14,156-31,458 lbs |
|
63-140KN |
|
|
RPM(r/min) |
50~120 |
|
Formation |
Medium formation with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener, Foundation roller cutters for different applications.
As a leading drill bits factory in China, increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price.
