Rotary tricone Bits IADC517 9 7/8″ (250mm) for hard rock
Product Description
API tricone bits in the stock from China supplier is always for your better well drilling.
Bit Description:
IADC: 517 - TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 - 100 MPA
12,000 - 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
Far Eastern Drilling can offer tricone drill bits in a variety of sizes (from 3 7/8” to 26”) and most of IADC Codes.
9 7/8 inches(250mm) is a regular size in deep well drilling like oil and gas well drilling, and it is also a regular size in horizontal directional pilot hole drilling.
Depending on the cutting material, silicone rubber drill bits are available in TCI (carbide insert) and steel tooth types. iADC517 is a TCI type silicone rubber drill bit.
Bearing structure.
High precision journal bearing with two thrust surfaces, ball locking cone, hard surface of head bearing, cone bearing inlaid with friction reducing alloy and then silver plated, which effectively improves the wear resistance and galling resistance of the bearing and is suitable for high speed.
Sealing and lubrication.
The advanced metal seal package consists of two metal seals and two elastic stiffeners. The compression stiffeners ensure good contact between the two sealing surfaces of the metal rings through elastic force to achieve sealing of the bearings. In drilling, the metal seals are relatively dynamic while the stiffeners are static, which will improve the reliability and durability of the bearing seal, while the pressure compensation system and advanced grease can greatly improve the reliability of lubrication.
Product Specification
Basical Specification |
|
Size of Rock Bit |
9 7/8inches |
250.8 mm |
|
Bit Type |
TCI Tricone Bit |
Thread Connection |
6 5/8 API REG PIN |
IADC Code |
IADC 517G |
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
Bearing Seal |
Elastomer or Rubber/ Metal |
Heel Protection |
Available |
Shirttail Protection |
Available |
Circulation Type |
Mud Circulation |
Drilling Condition |
Rotary drilling, high temp drilling, deep drilling, motor drilling |
Nozzles |
3 |
Operating Parameters |
|
WOB (Weight On Bit) |
19,773-56,175 lbs |
88-250KN |
|
RPM(r/min) |
140~60 |
Recommended upper torque |
37.93-43.3KN.M |
Formation |
Soft to medium formation with low compressive strength, such as mudstone, gypsum, salt, soft limestone, etc. |
We are a professional drill bit manufacturing factory, our products contain silicone rubber bits, PDC bits, HDD openers, foundation hobs for water wells, oil fields, gas wells, mining, construction, geothermal, directional drilling, underground foundation work all over the world. Our aim is to sell high quality products at the lowest price.