Well-designed Bit Tricone - API tricone rock bit IADC537 5 1/4″ (133mm) – FAR EASTERN
Well-designed Bit Tricone - API tricone rock bit IADC537 5 1/4″ (133mm) – FAR EASTERN Detail:
Product Description
Wholesale API rotary rock roller rock drill bits in the stock from China factory
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3 3/8″ to 26″) and all most of IADC codes.
We have two materials for the tricone bits, one material is Tungsten Caribde Insert bit , another material called Milled tooth or Steel tooth .The thread of IADC537 5 1/4″ is 3 1/2 reg pin. It will be used for water well drilling, geothermal well drilling and grouting hole drilling. Sealed/Closed bearing can extend the working life.Tungsten insert gauge and protection on heel protecstcone body can let the bit work better.
As drillers will consider the following factors druing the drilling job:
1)Working life of rock bit 2)Penetration rate of rock bits 3)Cost of drilling per meter/feet.
It is important for the above details what the drillers care about, so we will improve our drilling bits.We will produce our bits as per the detailed drilling conditions.
Our bits are exported more than 30 countries and serve the Oil and Gas,well and other industries Construction,Mining,Horizontal Directional Drilling(HDD),Geothermal and Environmental.
Product Specification
|
Basical Specification |
|
|
Size of Rock Bit |
5 1/4 inches |
|
133 mm |
|
|
Bit Type |
TCI Tricone Bit |
|
Thread Connection |
3 1/2 API REG PIN |
|
IADC Code |
IADC 537G |
|
Bearing Type |
Journal Sealed Bearing with Gauge Protection |
|
Bearing Seal |
Elastomer or Rubber/ Metal |
|
Heel Protection |
Available |
|
Shirttail Protection |
Available |
|
Circulation Type |
Mud Circulation |
|
Drilling Condition |
Rotary drilling,high temp drilling,deep drilling,motor drilling |
|
Nozzles |
Central Jet Hole |
|
Operating Parameters |
|
|
WOB (Weight On Bit) |
13,482-29,885lbs |
|
60-133KN |
|
|
RPM(r/min) |
50~120 |
|
Formation |
Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for different applications.
As a leading drill bits factory in China,increase the drill bit working life is our target. We always try to improve the bits with high penetration rates.Our purpose is to sell the high quality with the lowest price..
Product detail pictures:
Related Product Guide:
We have probably state-of-the-art output equipment, experienced and qualified engineers and workers, recognized good quality manage systems plus a friendly skilled income workforce pre/after-sales support for Well-designed Bit Tricone - API tricone rock bit IADC537 5 1/4″ (133mm) – FAR EASTERN , The product will supply to all over the world, such as: Irish, UAE, Brisbane, Many goods fully conform to rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Charlotte from Lahore - 2017.01.11 17:15
Managers are visionary, they have the idea of mutual benefits, continuous improvement and innovation, we have a pleasant conversation and Cooperation.
By Madeline from Estonia - 2017.11.12 12:31
